Colour oil to apply under a protective topcoat — Osmo Oil Stain

Osmo Oil Stain is a colouring oil for interior wooden floors and furniture. One application gives a transparent colour effect; a further colour coat can intensify the tone where the system permits. The grain remains part of the finished appearance.

Oil Stain is a colour stage, not a complete stand-alone finishing system. After the stain has dried, apply the specified Osmo Polyx-Oil topcoat to protect the colour against wear. Allow approximately 12 hours for the stain to dry without the optional accelerator. Colour and absorbency vary between wood surfaces, so test the complete stain-and-topcoat combination before starting. The topcoat is supplied separately.

This range comes in 1 L and 2.5 L packs. Check the currently available size and finish combinations before ordering.

Application at a glance#

• Intended use: Interior wooden floors and furniture
• Coverage: approximately 24–48 m²/L per coat
• Typical drying: Approximately 12 hours without optional drying accelerator
• Coat system: 1–2 colour coats followed by the specified Polyx topcoat
• Pack sizes: 1 L and 2.5 L

Follow the technical and safety information supplied with the product. Oiled cloths require safe handling because of the risk of self-heating.