Osmo

Coloured hard wax oil for pale interior wood — Osmo Polyx-Oil Tints

Osmo Polyx-Oil Tints is a transparent satin hardwax oil for colouring light interior wood, with a specified protective finishing system for floors.

Colour: Tinted
Packaging: Sealed retail tin
Use for: Pale wood, Furniture, Floors
Indoor / outdoor: Indoor

€146.21

incl. €24.37 VAT

Variants up to €146.21

Available to order

Size

Colour / finish3040 White

Quantity

Procured for your order.

Delivery to Belgium from €15.04

The exact price for your address is confirmed at checkout.

About this product

Osmo Polyx-Oil Tints is a transparent satin hardwax oil for colouring and protecting light interior wood. Seven standard tones change the appearance while leaving the grain visible: White, Light Grey, Honey, Amber, Terra, Graphite and Black.

For floors, apply one thin colour coat and follow it with the specified Polyx topcoat after drying. White 3040 needs the recommended white finishing system to reduce yellowing. Furniture can receive a stronger colour effect where the technical sheet permits. Allow approximately 24 hours for the colour coat to dry under suitable conditions. Always test the complete system on your actual timber.

This range comes in 750 ml and 2.5 L packs. Check the currently available size and finish combinations before ordering.

Application at a glance#

Use: light-coloured interior wood, furniture and wooden floors
Coverage: approximately 30 m² per litre for each colour coat
Typical drying: approximately 24 hours
Pack sizes: 750 ml and 2.5 L

Follow the technical and safety sheet supplied with the selected code. Handle oiled cloths safely because of the risk of self-heating.

Product photography shows representative packaging. Your selected pack size and finish identify the supplied product.

Specifications

Colour: Tinted
Brand: Osmo
Use on: Light-coloured interior wood, furniture and wooden floors
Packaging: Sealed retail tin
Use for: Pale wood, Furniture, Floors
Indoor / outdoor: Indoor

Buyer questions

Which colours are in the standard Polyx-Oil Tints range?

The seven standard tones are 3040 White, 3067 Light Grey, 3071 Honey, 3072 Amber, 3073 Terra, 3074 Graphite and 3075 Black. They leave the wood grain visible; the final tone depends on the wood and preparation.

Does Polyx-Oil Tints need a topcoat on wooden floors?

For floors, apply one thin colour coat followed by the specified Polyx finishing coat after drying. Use the system for the selected code, rather than treating the colour coat alone as the complete floor finish.

Which finishing coat should I use over 3040 White?

The manufacturer recommends Polyx-Oil Tints 3040 White as the finishing coat over 3040 White to prevent yellowing. Follow the exact white system in the technical sheet and test the complete finish on the actual timber.

How long does the Tints colour coat take to dry?

Allow approximately 24 hours under suitable conditions before continuing with the specified system. Apply thinly and evenly to light-coloured interior wood. Excess oil, poor ventilation or unsuitable conditions can extend drying.