Clear oil for walnut, teak and other oily hardwoods — Osmo Extra Thin 1101

Osmo Wood Wax Finish Extra Thin 1101 is a clear satin oil-and-wax finish developed for ingredient-rich hardwoods. It is an interior option for woods such as walnut, teak, iroko and mahogany, where the finish must suit the character of the timber. The oil enriches the grain and leaves a water- and dirt-resistant surface.

Apply to clean, dry, prepared wood and remove surplus material as directed. The manufacturer specifies one coat for furniture and two for floors and worktops, with approximately 12 hours of drying under suitable conditions. Suitability depends on the actual species and surface, so carry out a trial before treating the full piece.

This range comes in 750 ml and 2.5 L packs. Check the currently available size and finish combinations before ordering.

Application at a glance#

• Intended use: Ingredient-rich interior hardwood surfaces
• Coverage: approximately 24 m² per litre for each coat
• Typical drying: Approximately 12 hours
• Coat system: 1 coat for furniture; 2 for floors and worktops, following the technical sheet
• Pack sizes: 750 ml and 2.5 L

Follow the technical and safety information supplied with the product. Oiled cloths require safe handling because of the risk of self-heating.

Product photography shows representative packaging. Your selected pack size and finish identify the supplied product.