Osmo

Hard wax oil for furniture and floors — Osmo Polyx-Oil Original

Osmo Polyx-Oil Original is a clear hardwax oil for interior wooden floors and furniture, with matt, semi-matt, satin and glossy finishes.

Colour
Clear
Packaging
Sealed retail tin
Use for
Furniture, Floors
Indoor / outdoor
Indoor

€47.95

incl. €7.99 VAT

Variants up to €142.22

Available to order

Size

Colour / finish3062 Clear, Matt

1

Procured for your order.

Delivery to Austria from €8.21

The exact price for your address is confirmed at checkout.

About this product

Osmo Polyx-Oil Original is an oil-and-wax finish for interior furniture and wooden floors. It enriches the natural colour and grain while leaving a surface that resists water, dirt and everyday wear. Choose Clear Matt, Semi-Matt, Satin or Glossy to set the level of sheen.

Apply thinly to clean, dry, sanded wood. Clear finishes normally need two coats, with approximately 8–10 hours between coats under suitable conditions. Allow the finish to cure before heavy use. For renovation, a thin maintenance coat may be sufficient after proper cleaning. Always test the selected finish on the actual wood.

This range comes in 750 ml and 2.5 L packs. Check the currently available size and finish combinations before ordering.

Application at a glance#

  • Intended use: Interior wooden floors and furniture
  • Coverage: approximately 24 m² per litre for each coat
  • Typical drying: 8–10 hours
  • Coat system: 2 thin coats
  • Pack sizes: 750 ml and 2.5 L

Follow the technical and safety information supplied with the product. Oiled cloths require safe handling because of the risk of self-heating.

Product photography shows representative packaging. Your selected pack size and finish identify the supplied product.

Specifications

Colour
Clear
Brand
Osmo
Use on
Interior wooden floors and furniture
Packaging
Sealed retail tin
Use for
Furniture, Floors
Indoor / outdoor
Indoor

Buyer questions

Which Osmo Original sheen should I choose?
Osmo Polyx-Oil Original comes in 3011 Glossy, 3032 Satin, 3065 Semi-Matt and 3062 Matt. The sheen changes the reflection; all clear versions enrich the wood colour. Check the selectable finish for current availability.
Will Original keep pale wood looking untreated?
Clear Original enriches the natural colour and grain, including in the matt finish. For a paler appearance on light wood, compare the separately listed 3044 Raw and 3041 Natural systems and test the exact product on your timber.
How many coats does Polyx-Oil Original need?
Prepared bare wood normally needs two thin coats, with approximately 8–10 hours of drying between coats in suitable conditions. Dry-to-recoat time is different from full cure; allow the finish to cure before heavy use.
Can I refresh an existing Osmo oiled surface?
A thin maintenance coat may be sufficient on a compatible, previously oiled surface after proper cleaning. Remove incompatible coatings when preparing bare wood and always test the chosen finish before treating the whole surface.