Rubio Monocoat Oil Plus 2C
Two-component hardwax oil supplied as a 1 L Set A+B for interior wood.
€177.60
incl. €29.60 VATShipping calculated at checkout.
About this product
Rubio Monocoat Oil Plus 2C is a two-component hardwax oil that colours and protects interior wood in one coat. It bonds molecularly to the top microns of the wood within minutes, so it builds no film and leaves the grain and natural feel intact, with no overlaps and no starting marks.
One layer covers roughly 30 to 50 m² per litre. The finish is water- and heat-resistant and hard-wearing, which suits tabletops, worktops, stairs, floors, kitchens and bathrooms across solid wood, veneer and MDF. The oil carries 0% VOC and is food- and toy-safe (GreenGuard Gold, Eurofins Indoor Air Comfort Gold, EN 71-3 toy safety, Food Contact Compliance).
Supplied as a 1 L Set A+B: the oil (component A) with the Accelerator (component B) for faster drying, faster curing and a stronger result. Mix roughly 3 parts A to 1 part B, apply within 4 to 6 hours of mixing, then wipe on and wipe off the excess within about 30 minutes. Drying takes 12 to 24 hours; the surface reaches roughly 80% cure in 2 days and full cure in 5.
Choose your colour from the full standard range of 40 shades below.
Specifications#
| Specification | Detail |
|---|---|
| Product | Two-component hardwax oil (colour and protection) |
| Pack size | 1 L Set (component A plus Accelerator B) |
| Mix ratio | Approx. 3 parts A to 1 part B |
| Working time | Apply within 4 to 6 hours of mixing |
| Coverage | Approx. 30 to 50 m² per litre, one coat |
| Drying | 12 to 24 hours |
| Cure | Approx. 80% in 2 days, full cure in 5 days |
| VOC | 0% |
| Certifications | GreenGuard Gold, Eurofins Indoor Air Comfort Gold, EN 71-3, Food Contact Compliance |
| Substrates | Solid wood, veneer, MDF |
| Colours | 40 standard shades |
Technical guide and full catalogue (PDF): https://25068682.fs1.hubspotusercontent-eu1.net/hubfs/25068682/RMC_GeneralProductCatalogue_International_2025_EN_LowRes-1.pdf
Safety note: soak used cloths and pads in water before disposal, as oil-soaked cloths can self-combust.
How to apply
- 1
Mix the two components
Mix component A with component B at roughly 3 parts A to 1 part B, then use the mixture within 4 to 6 hours.
- 2
Apply the oil
Apply the product and wipe off the excess within about 30 minutes of application.
- 3
Allow it to dry and cure
Drying takes 12 to 24 hours, the surface reaches roughly 80% cure in 2 days, and full cure takes 5 days.
- 4
Dispose of cloths safely
Soak used cloths and pads in water before disposal.
