Oil for interior doors and joinery — Osmo Door-Oil

Osmo Door-Oil is an interior oil-and-wax finish for wooden doors, frames and suitable joinery. 3060 Clear Satin enriches the wood colour and grain. Lightly white-pigmented 3033 Raw Matt is intended to keep lighter timber looking paler.

Apply two thin coats to properly prepared wood, allowing approximately 12–24 hours of drying in suitable conditions. Check the door manufacturer’s instructions before treating veneer, since not every veneered construction accepts the same finish or renovation process. Raw Matt can show white pigment on dark or reddish wood. Test the selected product on the actual surface before completing the door.

This range comes in 1 L packs. Check the currently available size and finish combinations before ordering.

Application at a glance#

• Intended use: Interior wooden doors, frames and suitable joinery
• Coverage: approximately 24 m²/L per coat
• Typical drying: 12–24 hours
• Coat system: 2 thin coats
• Pack sizes: 1 L

Follow the technical and safety information supplied with the product. Oiled cloths require safe handling because of the risk of self-heating.

Product photography shows representative packaging. Your selected pack size and finish identify the supplied product.