STIHL MS 362

Professional 59 cc petrol chainsaw for forestry, felling and demanding firewood work.

€ 1.156,80

incl. € 192,80 btw
3 beschikbaar
1

Controleer de betaal- en bezorggegevens bij het afrekenen.

Ingekocht voor je bestelling.

Verzendkosten worden berekend bij het afrekenen.

The STIHL MS 362 is a professional-grade petrol chainsaw built for forestry, felling and demanding firewood work. It pairs a 59.0 cc two-stroke engine with a 5.6 kg powerhead, giving trained operators a strong power-to-weight ratio for sustained cutting in the field.

Power is rated at 3.4 kW (4.56 hp), and the saw is supplied with a 40 cm (16") guide bar, a length suited to limbing, bucking and felling small to mid-diameter timber. It runs on a standard petrol and two-stroke oil mix, so it works on sites without mains power. STIHL's anti-vibration system damps the vibration carried into the handles, which matters over a full day of cutting.

This is a tool for experienced users and professional crews rather than occasional homeowner use.

Specifications#

SpecificationDetail
BrandSTIHL
ModelMS 362
TypeProfessional petrol chainsaw
Engine59.0 cc single-cylinder two-stroke
Power output3.4 kW (4.56 hp)
Powerhead weight5.6 kg (without bar, chain and fuel)
Guide bar40 cm (16")
Chain pitch3/8"
FuelPetrol and two-stroke oil mix
Fuel tankApprox. 0.60 L
Chain-oil tankApprox. 0.33 L
Anti-vibrationYes

Good to know#

Petrol and two-stroke oil are not included. Chainsaw work requires appropriate protective equipment and proper training; the MS 362 is not intended for casual, occasional use. The platform can typically run guide bars from 16" up to 25" depending on the cutting work and chain setup.

Vragen van kopers

Who is the STIHL MS 362 for?
It is a professional-grade saw aimed at experienced users, forestry workers and tradespeople who cut for sustained periods. It is heavier and more powerful than a homeowner saw, and rewards proper technique and protective equipment rather than occasional casual use.
What bar length does it use?
It is supplied with a 40 cm (16 inch) guide bar, which suits limbing, bucking and felling small to mid-diameter timber. The MS 362 platform can typically run bars from 16 to 25 inches depending on the cutting work and chain setup.
What fuel does it run on?
A standard mix of petrol and two-stroke engine oil, so it works anywhere without mains power. Fuel and oil are not included. Use the petrol-to-oil mix ratio specified by STIHL for your two-stroke oil.
Is protective equipment required?
Yes. Chainsaw work calls for appropriate personal protective equipment, including a helmet, hearing and eye protection, gloves and cut-retardant trousers or chaps, along with proper training. The MS 362 is not intended for casual, occasional use.
What does the powerhead weigh?
The bare powerhead weighs about 5.6 kg without the guide bar, chain and fuel. Add the bar, chain and a full tank of fuel for the real in-use weight while cutting.