Carpinus betulus
Valgepöök
Pale, ruthlessly dense, and famously hard. The wood old joiners reached for when they needed plane bodies, mallet heads, and water-mill cogs that would not give up.
- This species is recorded as commercially grown in Europe. This does not establish where an individual piece was harvested; check its origin details.
- Botaaniline rühm. Okaspuid on paljasseemnetaimed, lehtpuid laialehised puud.
- Botaaniline sugukond, kuhu liik kuulub.
Saa saabumisel teavitusVõrdluspuiduliik. Praegu pole tükke laos.
Kas see sobib teie projektile?
Sobib hästi
- Plane bodies and mallet heads
- Tool handles and chisel handles
- Turned work, bowls, finials, pepper mills, fine spindles
- Joinery accents, wedges, splines, drawbore pins, dovetail keys
- High-wear surfaces, chopping boards, butcher blocks, jig faces
- Gear teeth, cogs, and replacement parts in restored mills
Puiduliiki Valgepöök praeguses valikus pole
Sarnased puiduliigid laos
Puiduliiki Valgepöök praegu pole. Need puiduliigid sobivad samadeks projektideks ja neist on tükke saadaval.
Saa teavitus puiduliigi Valgepöök kohta
Saadame teile kirja, kui uued puiduliigi Valgepöök plangud KORENAsse jõuavad. Iga tükk on ainulaadne, seega on varajasest teatest kasu.
Puidu välimus
Kuidas see välja näeb
Creamy white to pale straw, sometimes drifting to light grey-brown with age. Grain is irregular and often interlocked; texture is fine and even. Almost no figure, no drama, its character is in the surface itself, which polishes to a hard, near-ceramic feel that softer pale woods cannot match.
- Creamy white to pale straw when fresh
- Drifts to light grey-brown with age and UV
- Occasional grey streaking on slower-grown stock
- Almost figureless, reads as a clean, even pale ground
- Polishes to a hard, near-ceramic surface sheen
- Ebakorrapärane kiud, peen ühtlane tekstuur.
Töötlemine
Töötlemine
A specialist wood. Density and interlocked grain blunt edges fast. Expect to sharpen often and feed slowly. Planing tears out unless irons are keen and the cut is light; a scraper or sander often finishes better than a plane. Drilling and routing demand sharp carbide. The reward is on the lathe, where it turns to a fine, crisp surface and holds detail other woods crush. Glues and screws well once pre-bored. Steam-bends reasonably for such a dense species.
Viimistlus
Sands to a glassy surface if you stay patient and step through the grits. Takes hard waxes, oils, and lacquers cleanly. Stains can blotch on the interlocked patches. Test first. Burnishes beautifully on the lathe; many turners leave it bare or oil-only.
Kuivatamine
Dries slowly and moves a lot, tangential shrinkage of 11 to 13 percent puts it among the most mobile European hardwoods. Prone to distortion, surface checks, and case-hardening if rushed. Air-dry under weight, then finish in a kiln on a gentle schedule. Acclimatise in the workshop for several weeks before machining, and design for movement in any wider piece.
Kui palju see liigub?
Puit paisub ja kahaneb laiuses, kui õhk muutub niiskemaks või kuivemaks. Hinnake puiduliigist Valgepöök lauaplaadi hooajalist liikumist enne kinnituste kavandamist.
Eeldatav hooajaline liikumine
umbes 13,7 mm
Suur. Kasutage klotse või piluklambreid, jätke otsalaudade otstesse varu ja laske plangul enne kokkupanekut kohaneda.
Lineaarse kahanemise mudel: laius × (kahanemine ÷ 28% kiu küllastuspunkt) × niiskusesisalduse hooajaline muutus. Kasutab puiduliigi Valgepöök puhul 12% tangentsiaalne kahanemist. Planeerimishinnang, mitte tagatis.
Kui palju see maksab
Ohutus ja hankimine
- This species is recorded as commercially grown in Europe. This does not establish where an individual piece was harvested; check its origin details.
- IUCNi punase nimestiku seisund: selle liigi ülemaailmne looduskaitseline hinnang.
Food-contact safe once finished, which is why it has a long history in kitchen tools and chopping blocks. The dust is a known skin irritant and can sensitise on repeated exposure. Wear long sleeves, run good extraction, and mask up when sanding.
Loe täielikku juhenditPõhjalikud märkmed mustri, värvimuutuse, töötlemise ja stabiilsuse kohta.
What Hornbeam actually is#
Carpinus betulus is the wear wood. At 735 kg per cubic metre and 7,260 N Janka it is the second hardest measured species in this catalogue, behind only robinia, and it has a fine even texture with no strong grain direction.
That combination, hardness without a pronounced grain to split along, is what made it the traditional wood for things that get hit, rubbed and worn: plane soles, mallet heads, gear teeth in windmill and watermill machinery, butchers blocks, and cogs.
It is not a decorative wood and it was never used as one.
Reading a hornbeam slab#
Colour is pale, near white to light cream, sometimes with grey streaking. Figure is minimal. The texture is fine and even and the surface has a slight natural lustre.
The characteristic feature of the tree is fluting: the trunk grows with pronounced longitudinal ridges rather than round, which is why hornbeam logs look twisted and why converting them to wide clean boards is awkward. Expect irregular widths and a good deal of waste.
Grain is frequently interlocked, following the fluting.
The movement problem#
Ostjate küsimused
Ostjate küsimused
Why is Hornbeam used for tool parts and machinery?
It is exceptionally hard at 7,260 N, second only to robinia among measured species here, with a fine even texture and no pronounced grain direction. That combination resists wear without splitting, which is why it was the traditional wood for plane soles, mallet heads, gear teeth in mill machinery, and butchers blocks.
How much does it move?
A great deal. Volumetric shrinkage of 17.0 percent ties with beech for the highest in this catalogue, and tangential shrinkage of 11.0 percent against 5.5 percent radial is a very wide differential. Hornbeam is not a wood for wide solid tops in a variable environment. It is a wood for small dense components.
Is it hard to work?
Yes. The density and interlocked grain blunt tooling quickly and cause tear-out, and it is heavy going by hand. The fine texture that makes it wear so well is the same thing that makes it resist cutting. Sharp carbide tooling and light cuts are the practical answer.
Can it be used outdoors?
No. Despite its hardness it is rated decay class 5, perishable, and it will rot readily if exposed. Hardness and durability are unrelated properties. For exterior work use robinia, oak or sweet chestnut.
Mehaanilised omadused
Tehnilised andmed
Avaldatud võrdlusväärtused. Kui allikad erinevad, kuvatakse vahemik ja ülalolevatel skaaladel kasutatakse tüüpilist väärtust.
| Tihedus (kg/m³)Mass kuupmeetri kohta umbes 12% niiskusesisalduse juures. Raskem puit on tavaliselt kõvem ja tugevam. | 700–820 kg/m³tüüpiline 735 kg/m³ |
|---|---|
| Janka kõvadus (N)Jõud, mis on vajalik teraskuuli pooleldi puitu surumiseks. Standardne mõlgikindluse mõõt. | 6,900–7,700 Ntüüpiline 7260 N |
| MOR: paindetugevus (MPa)Paindetugevus: koormus, mille juures tala murdub. | 110–130 MPa |
| MOE: elastsusmoodul (GPa)Paindejäikus: kui palju riiul või lauaplaat koormuse all läbi paindub. | 12.0–14.0 GPa |
| Radiaalne kahanemineKahanemine risti kasvurõngastega toorest kuni täiesti kuivani. Nii liigub radiaalselt saetud saematerjal. | 5.5–7.0 % |
| Tangentsiaalne kahanemineKahanemine piki kasvurõngaid. Nii liiguvad tangentsiaalselt saetud lauad ja enamik planke. |
