Pyrus communis

European Pear

Master-grade carving and cabinet wood with a fine even texture. Slab-size pieces are rare and prized when they appear.

Pranešti, kai atsirasŽinyno medienos rūšis. Šiuo metu vienetų neturime.

Ar tinka jūsų projektui?

Puikiai tinka

Heirloom carving and sculpture
Fine cabinetry and case pieces
Marquetry and inlay
Jewellery boxes and instrument cases
Small statement tables and side tables
Turned bowls and treen

Dabartinėje kolekcijoje European Pear nėra

Turimos panašios medienos rūšys

Šiuo metu European Pear nėra. Šios medienos rūšys tinka tiems patiems projektams, o jų vienetų turime.

Gaukite pranešimus apie European Pear

Parašysime jums, kai KORENA pasirodys naujų European Pear storlenčių. Kiekvienas vienetas yra vienetinis, todėl verta sužinoti iš anksto.

Medienos išvaizda

Kaip atrodo

Pale pinkish-tan to warm salmon, deepening to a soft russet with age and light. Texture is dense, even, and almost poreless under the hand. Figure is quiet, gentle ribbon and the occasional fine fleck, which is exactly why carvers and marquetry workers prize it. The grain doesn't fight you, and detail holds crisply.

Pale pinkish-tan when fresh off the saw
Warm salmon to soft russet with age
Steamed pear takes a uniform pinkish hue
Stains evenly to deep black for ebonised work
Subtle ribbon figure; rarely dramatic
Mild UV warming, no harsh colour shift
Very fine even texture; subtle figure.

Apdirbimas

Carves, turns, and planes superbly, this is a benchmark wood for fine work. Cuts cleanly across the grain without tearing, holds knife-edge detail, and turns to crisp profiles. Sands to a near-polished surface straight off the tool. Glues and screws well. Steam bending is moderate. The low stiffness helps it bend, but it can compress unevenly, so test on offcuts.

Apdaila

Sands to a glass-smooth surface, one of the cleanest finishes you can pull off any European hardwood. Takes oil, wax, and shellac evenly with no blotching. Steaming produces the uniform pinkish tone historically used to imitate ebony when stained black (the piano-key trick). For natural finishes, hard-wax oil holds the warm tone; lacquer can flatten it. Expect mild warming in UV.

Džiovinimas

Honest tradeoff: tangential shrinkage is high (10.5–12%) against modest radial movement, so drying rate matters. Pear that's rushed will check, cup, and case-harden. Air-dry slowly under weight, then finish in a kiln on a gentle schedule. Once stable, it sits well indoors. Quartersawn or rift-sawn stock is the safer cut for wide panels.

Kiek mediena brinks ir trauksis?

Kintant oro drėgnumui, mediena skersai pločio brinksta ir traukiasi. Prieš projektuodami tvirtinimus apskaičiuokite numatomą sezoninį European Pear stalviršio pokytį.

Stalviršio plotis800 mm

Pjūvis

Kur bus naudojama

Numatomas medienos brinkimas ir traukimasis per sezoną

apie 12,9 mm

Didelis. Naudokite laikiklius arba gembes su pailgomis angomis, galuose palikite tarpus ir prieš surinkdami leiskite storlentei prisitaikyti prie aplinkos.

Linijinio nuodžiūvio modelis: plotis × (nuodžiūvis ÷ 28 % plaušo soties riba) × sezoninis drėgnio pokytis. European Pear skaičiuojamas taikant 11,25 % tangentialinis nuodžiūvį. Tai planavimo įvertis, ne garantija.

Kiek kainuoja

Sauga ir tiekimas

Food-contact safe, pear has a long tradition as kitchen utensil and treen wood. Not a commonly reported dust sensitiser. Standard shop dust extraction is enough.

Skaityti visą vadovąIšsamios pastabos apie tekstūrą, spalvos pokyčius, apdirbimą ir stabilumą.

What European Pear actually is#

Pyrus communis is the fine detail wood of Europe. Its texture is exceptionally close, even and dense, with essentially no visible grain direction, and at 7,420 N Janka it is one of the hardest species in this catalogue.

That pairing is unusual. Most woods that hold fine detail are soft, like lime. Most woods that are hard have pronounced grain that fights the tool, like oak. Pear is both hard and directionless, so carved detail is crisp and then survives being handled.

It is the traditional wood for woodcut printing blocks, recorders and wind instrument parts, drawing instruments, rulers, set squares and fine inlay, and all of those uses depend on the same property.

The orchard problem#

Pear is a fruit tree. It is grown for pears, and it reaches the timber market when an orchard tree comes to the end of its productive life.

The consequences are structural. Trunks are short and often irregular. Diameters are modest. Clean wide boards are genuinely scarce, and slab sized material is uncommon enough that finding it is the main constraint rather than affording it.

Expect narrow widths, short lengths, and a good deal of character.

Steamed and unsteamed

Vartotojų klausimai

Why is pear so highly regarded for carving and instruments?

Its texture is exceptionally fine, even and dense, with essentially no visible grain direction, so it cuts equally well in any direction and holds very crisp detail. At 7,420 N Janka it is also hard, which means carved detail survives handling. That combination of fine texture and hardness is rare and is why pear has been the traditional wood for woodcuts, recorders, rulers and instrument parts.

What is steamed pear?

Pear that has been steamed during drying, which turns the pale pinkish wood a warm rose brown and evens the colour. It is the standard European commercial treatment and the colour most people associate with the species. Unsteamed pear is paler and more variable. The change is permanent.

Why are pear boards so small?

It is an orchard tree, grown for fruit and felled at the end of its productive life rather than for timber. Trunks are short, often irregular, and rarely large. Wide clean pear is genuinely scarce and priced accordingly, and slab sized material is uncommon.

How much does it move?

Mechaninės savybės

Techniniai duomenys

Paskelbtos orientacinės vertės. Jei šaltiniai nesutampa, nurodomas intervalas, o pirmiau pateiktoms skalėms naudojama tipinė vertė.

Tangentialinis nuodžiūvis
Tankis (kg/m³)	650–740 kg/m³tipinė vertė 700 kg/m³
Kietumas pagal Janka (N)	6,800–7,800 Ntipinė vertė 7 420 N
MOR: stipris lenkiant (MPa)	75–90 MPa
MOE: tamprumo modulis (GPa)	7.0–8.5 GPa
Radialinis nuodžiūvis	4.0–5.0 %

Drawing instruments and tool handles

Ebonised detail work (piano-key tradition)

Pranašumai

Atkreipkite dėmesį

Native across Europe, from orchards and hedgerows. Most pear comes in small sections from old orchard trees, so a true slab is uncommon stock, usually a long-lived garden or estate tree that grew large enough to mill.

IUCN Least Concern, no CITES listing. Native European species, often sourced from orchard clearances and estate trees rather than dedicated forestry, which means supply is opportunistic and slabs are scarce. Decay class 5, perishable, so this is strictly interior wood.

Most European commercial pear is steamed during drying.

Steaming turns the pale pinkish natural colour to a warm rose brown and evens out variation. This is the colour most people picture when they think of pear, and it is the standard for instrument and cabinet work.

Unsteamed pear is paler, closer to a pinkish cream, and more variable between boards. Both are the same species and the difference is permanent, so decide at the outset and buy accordingly.

The movement problem#

This is the one number that spoils an otherwise excellent wood.

Tangential shrinkage of 10.5 percent against radial at 4.0 percent is among the widest differentials in this catalogue, wider than oak, wider than ash. Volumetric shrinkage of 11.5 percent is only moderate, so the total movement is unremarkable, but the distortion is severe because the two axes are so far apart.

Flatsawn pear cups hard. Quartersawn stock is markedly better behaved and is worth seeking out for anything that must stay flat.

Given the small sizes the species comes in, most pear ends up in components small enough that this matters less than it would in a wide top. If you do have a pear slab wide enough for a tabletop, that ratio is the thing to design around.

Pear works beautifully and it works hard. At 7,420 N it blunts tooling steadily and asks for power, but the fine texture means it cuts cleanly rather than tearing.

It carves exceptionally, turns exceptionally, and takes a polished surface directly from the tool with very little abrasive work. It glues reliably and holds fine screws with pilot holes.

It also bends reasonably well and takes a very crisp moulded profile, which is why it appears in period furniture as mouldings and edge details.

The fine dense surface takes finish evenly and needs no grain filling. Steamed pear under a clear oil is a warm rose brown that many makers consider among the most attractive surfaces in European furniture.

It stains poorly and rarely needs to. Pear is often used precisely because its own colour is wanted.

It is also the traditional substrate for ebonising, taking black stain evenly because there is no open grain to break up the surface, which is how pear was used as a substitute for ebony in period work.

Where European Pear is the right answer#

Carving and fine detail work, musical instrument parts, drawing and measuring instruments, inlay and marquetry, small cabinetry, turned work, and mouldings. Also ebonised work.

It is the wrong answer for anything large, anything outdoors at decay class 5, and anything where a wide flatsawn surface must stay flat.

Not CITES listed and assessed as Least Concern. The tree is common across Europe but timber supply is limited by the orchard felling pattern rather than by scarcity of trees. Provenance chains are short and non-standardised, and KORENA records the yard and region on every listing.

Tangential shrinkage of 10.5 percent against radial at 4.0 percent is a very wide differential, among the widest in this catalogue, so flatsawn pear cups strongly. Volumetric shrinkage of 11.5 percent is only moderate, so the total movement is not extreme but the distortion is. Quartersawn stock is markedly better behaved.

Can pear be used outdoors?

No. It is rated decay class 5, perishable, despite being hard and dense. Hardness and durability are unrelated. Pear is an interior wood for fine work, and it is too scarce and valuable to put outside.

Tūrinis nuodžiūvis	11.5–13.5 %

Natūralus patvarumas (EN 350)	Class 5 — Perishable

Šaltiniai

The Wood Database(žiūrėta 2026-05-09)
USDA FPL Wood Handbook FPL-GTR-190 (2010)(žiūrėta 2026-05-09)
Meier, E. — WOOD! Identifying and Using Hundreds of Woods Worldwide (2015)(žiūrėta 2026-05-09)

Trumpai

KietumasLabai kieta

Kietumas pagal Janka 7 420 N

49 % kietesnė už ąžuolą

SvorisSunki

700 kg/m³

StabilumasVidutiniškai kinta

12,5 % tūrinis nuodžiūvis

ApdirbimasLabai lengva

4,6 / 5 apdirbimo vidurkis

Naudojimas laukeTik patalpoms

EN 350 klasė 5

European Pear rinkos orientacinės kainos dar nėra. Kiekvieno KORENA vieneto kainą atskirai nustato partnerio medienos sandėlis.

Greitai atšipina įrankius

Labai kieta ir tanki. Naudokite aštrius įrankius ir kiekvienam varžtui išgręžkite pirminę skylę.

Palieskite žymą ir peržiūrėkite išsamiau.