Hard Maple

Native to eastern North America, Canada and the northern United States, not to Europe. Imported as a furniture-grade hardwood with a long, well-established trade route into the EU. Sometimes sold as Sugar Maple or Rock Maple; all are Acer saccharum.

The figure premium#

Plain hard maple is a quiet, pale, almost featureless wood. A small proportion of trees produce figure, and it is priced very differently.

Curly or flame maple carries a wave in the grain that produces rippling chatoyance shifting with viewing angle. Birdseye maple shows a pattern of small swirled eyes across the surface, and its cause is still not fully explained.

Neither is predictable from the standing tree, which is why figured maple is expensive: it is found rather than grown.

The staining problem#

Maple's main weakness is finishing. The dense closed grain that makes it hygienic makes it absorb stain unevenly, and it blotches badly, particularly on flatsawn faces and in figured stock where the grain wave changes absorption from millimetre to millimetre.

Pigment stain on curly maple will produce a muddy, patchy result that obscures the very figure you paid for.

Use a dye rather than a pigment stain, or a gel stain that sits on the surface, or seal first with a thin washcoat. Test on an offcut from the same board every time, because behaviour varies between boards of the same species.

Most figured maple is best finished clear, with an oil or a water based finish, letting the chatoyance carry the surface.

At the bench#

It works cleanly with sharp tools and blunts them at a fair rate. It turns very well, holds crisp detail, glues reliably and takes fastenings securely with pilot holes.

Figured stock tears out and wants light cuts, a high angle plane or a scraper.

It sands to a very fine surface, which suits its usual clear finish.

Movement#

Volumetric shrinkage of 14.5 percent is on the high side, with tangential at 9.5 percent against radial at 4.5 percent, a wide differential. Flatsawn maple cups.

For a chopping block this matters less than it sounds, because blocks are usually built as laminated end grain or edge grain constructions where movement is distributed and restrained. For a wide solid top, quartersawn is worth the cost.

Where Hard Maple is the right answer#

Chopping boards and butchers blocks, kitchen worktops, workbench tops, flooring, and any decorative work where curly or birdseye figure is the design.

It is the wrong answer outdoors, being decay class 5, and wrong wherever a rich stained colour is the goal.

Sourcing and EUDR#

Not CITES listed and assessed as Least Concern. Native to eastern North America, so European buyers are usually importing, with the longer documentation chain that implies. Where a pale dense European alternative is acceptable, European Sycamore or beech cover similar ground with a shorter chain, though neither matches hard maple for a food surface.

Spalted maple#

Because maple is pale and perishable, it spalts readily, and spalted maple is a category in its own right.

Spalting is the early stage of fungal decay. Different fungi competing within a log lay down black zone lines where their territories meet, producing fine dark tracery across a pale background. The effect is unlike any grain figure and cannot be imitated.

The difficulty is that spalting is decay, and it does not stop by itself. Timber left too long goes soft, punky and structurally useless. Usable spalted maple is caught at a specific moment and then dried to kill the fungus.

Buying spalted stock means checking soundness rather than just admiring the pattern. Press a fingernail into the palest zones: if it sinks easily the wood has gone too far. Punky areas can be stabilised with resin for turning but are not suitable for a work surface.

Spalted dust also carries a higher fungal spore load than sound timber, so extraction and a mask matter more than usual.

End grain against edge grain blocks#

For a chopping block, the construction matters as much as the species.

End grain blocks present the cut fibre ends upward, so a knife edge parts the fibres rather than severing them and the surface closes behind the cut. They are kinder to knives and self healing, but they absorb more moisture and need more maintenance.

Edge grain blocks are simpler to build, more dimensionally stable and easier to keep dry, at the cost of showing knife marks sooner.

Both work in hard maple. End grain is the traditional butchers block and the better performing surface if you will look after it.

Poorly, and this is its main finishing weakness. The dense closed grain absorbs pigment unevenly and blotches badly, particularly on flatsawn faces and in figured stock. Use a dye, a gel stain, or a conditioner first, and always test on an offcut from the same board.

• DobráPílenie
• DobráHobľovanie
• Veľmi dobráBrúsenie
• VýbornáSústruženie
• DobráRezbárske opracovanie
• Veľmi dobráLepenie
• Veľmi dobráDržanie skrutiek / klincov
• Veľmi dobráOhýbanie parou

Pre drevinu Hard Maple zatiaľ nemáme referenčnú trhovú cenu. Každý kus KORENA oceňuje jeho partnerský sklad samostatne.

Ťuknutím na štítok zobrazíte podrobnosti.