Castanea sativa

Sweet Chestnut

A lighter, softer cousin of oak. Tannin-rich heartwood gives it real durability outdoors, but those same tannins react with iron, so fixings need to be stainless or brass.

Faigh fógra nuair a thagann séSpeiceas tagartha. Níl píosaí i stoc faoi láthair.

An oireann sé do do thionscadal?

Iontach do

External cladding and rainscreens
Interior wall and ceiling panelling
Barn-style and rustic furniture frames
Garden furniture and pergolas
Coopered tanks, vats, and planters
Beams and exposed structural framing

Níl Sweet Chestnut san eisiúint reatha

Speicis chomhchosúla i stoc

Níl Sweet Chestnut againn anois. Oireann na speicis seo do na tionscadail chéanna agus tá píosaí ar fáil.

Faigh fógra faoi Sweet Chestnut

Seolaimid ríomhphost chugat nuair a thagann leaca úra Sweet Chestnut chuig KORENA. Tá gach píosa uathúil, mar sin is fiú fógra luath.

Cuma an adhmaid

An chuma atá air

Straight-grained and coarse-textured, with prominent ring-porous figure that reads as oak at a glance. Heartwood is a warm honey-brown that ambers with age; sapwood is a narrow pale band. Lacks oak's strong medullary rays, so quartersawn faces are calmer and less flecked.

Heartwood: warm honey to mid-brown, ambers with age
Sapwood: narrow, pale cream to light straw
Fumed: deep chocolate to near-black with ammonia
Oiled: pulls warmer and slightly redder than oak
Weathered outdoors: silver-grey patina within 1–2 seasons
Straight grain, coarse texture; resembles oak.

Ag obair leis

Saws and planes well with sharp tooling. Softer than oak, so it dents more easily but is also kinder on edges. Splits readily when screwed near ends or edges, pre-drill and countersink. Glues and steam-bends predictably. Turning is workable but the coarse grain can tear on end-grain cuts.

Bailchríoch

Takes oil, hardwax, and water-based finishes cleanly. Open pores benefit from a grain filler if you want a glass-flat surface, or leave them open for a tactile, oak-like read. Fuming with ammonia darkens it deeply thanks to the high tannin content. Test stains on offcuts, tannins can pull cool tones grey.

Stálú

Dries slowly and is prone to ring shake and honeycomb if pushed. Air-dry to around 25–30% MC before kilning, then run a gentle schedule. Movement in service is moderate, tangential shrinkage near 7% means wide boards want room to move in panels and tabletops.

Cé mhéad a bhogfaidh sé?

Atann agus crapann adhmad trasna a leithid de réir mar a éiríonn an t-aer níos taise nó níos tirime. Meas gluaiseacht shéasúrach barr Sweet Chestnut sula ndearann tú na feistis.

Leithead an bharr800 mm

Gearradh

An áit ina mbeidh sé

Gluaiseacht shéasúrach mheasta

thart ar 7.7 mm

Ceangail an barr le cnaipí nó lúibíní sliotánacha, ní le gliú ná scriúnna teanna.

Samhail líneach craptha: leithead × (crapadh ÷ 28 % sáithiú snáithíní) × luascadh séasúrach cion taise. Úsáidtear crapadh tadhlaíoch 6.75 % do Sweet Chestnut. Meastachán pleanála, ní ráthaíocht.

An costas

Sábháilteacht agus foinsiú

Dust is a reported skin and respiratory sensitiser, extract at source and wear a fitted mask when sanding or routing. Heartwood is rated food-contact safe once finished. Critical detail: chestnut tannins react with iron and produce black staining wherever the two meet in the presence of moisture. Use stainless steel or brass fixings, and keep iron tooling off damp stock.

Léigh an treoir iomlánNótaí mionsonraithe ar phatrún, athrú datha, oibriú agus cobhsaíocht.

What Sweet Chestnut actually is#

Castanea sativa is often sold as the light alternative to oak, and for appearance and durability that description holds. It is ring porous with a similar grain pattern, it carries a similar warm brown colour, and at decay class 2 it is genuinely durable outdoors.

Where the comparison breaks down is hardness. At 3,010 N Janka chestnut is the softest hardwood in this catalogue apart from black poplar, softer than Scots Pine and less than two thirds as hard as oak. Anyone expecting oak-like wear resistance from an oak-like appearance will be disappointed.

The other difference is visible: chestnut lacks oak's prominent rays, so a quartersawn chestnut board shows no ray fleck.

Ring shake, which is the thing to inspect for#

Chestnut is notably prone to ring shake, a separation along a growth ring inside the log.

The problem is that it frequently does not show on a rough sawn face. A board looks sound, gets machined, and the shake opens into a crescent shaped split that follows the ring and effectively ruins it.

This is the main reason chestnut yields far less usable timber than the abundance of the tree suggests, and it is the main reason to look carefully rather than quickly at a chestnut slab. Check end grain for any ring separation, and look along the length in raking light for a crescent line.

Ceisteanna ceannaitheoirí

How is Sweet Chestnut different from oak?

It looks similar and is durable like oak, but it is much lighter and softer at 590 kg per cubic metre and 3,010 N Janka against 675 and 4,980 for European oak. Chestnut also lacks the prominent rays, so it has no ray fleck on quartersawn faces. It is often described as oak without the weight, which is fair for appearance and durability but not for hardness.

What is ring shake and why does it matter in chestnut?

A separation along a growth ring inside the log, which chestnut is particularly prone to. It may be invisible on a rough sawn surface and open up after machining, effectively ruining a board. It is the main reason chestnut yields less usable timber than its abundance suggests, and the main thing to inspect for when buying.

Can it be used outdoors?

Yes. At decay class 2 it is durable, and its high tannin content gives real resistance to rot. Chestnut has been the traditional European timber for fencing, cladding, shingles and outdoor structures for centuries, and coppiced chestnut fence posts are still a standard product.

Does it stain black like oak?

Airíonna meicniúla

Sonraí teicniúla

Luachanna tagartha foilsithe. Nuair nach n-aontaíonn foinsí, taispeántar an raon agus úsáidtear an luach tipiciúil do na scálaí thuas.

Crapadh tadhlaíoch
Dlús (kg/m³)	540–650 kg/m³tipiciúil 590 kg/m³
Cruas Janka (N)	2,700–3,300 Ntipiciúil 3,010 N
MOR: modal réabtha (MPa)	70–85 MPa
MOE: modal leaisteachais (GPa)	8.0–10.0 GPa
Crapadh gathach	3.5–4.5 %

Doors, gates, and shutters

Flooring in lower-traffic rooms

Native across southern and Mediterranean Europe, with long-managed coppice woodlands in France, Italy, and the Iberian peninsula. Also grown in the UK and parts of central Europe. KORENA sources mainly from European coppice and standard-tree harvests.

Native European species, IUCN Least Concern, no CITES restrictions. Much of the European supply comes from coppice systems, short-rotation, low-input, and a working part of rural land management in France and Italy. Ask for FSC or PEFC chain-of-custody where it matters to your client. KORENA records the certification it holds on the slab passport.

On a measured KORENA slab, a shake large enough to matter appears in the defect outline rather than being discovered at the bench.

Durability and tannin#

Chestnut is very high in tannins, and that is where its durability comes from. At decay class 2 it is a genuine exterior timber and has been used across Europe for fencing, cladding, shingles, gates and outdoor structures for centuries. Coppiced chestnut fence posts remain a standard product precisely because they last without treatment.

The same tannins make the iron reaction worse than in oak. Contact with steel produces blue black staining quickly, particularly when damp. Use stainless or brass fixings on any chestnut and treat it as non-negotiable on exterior work.

Chestnut is easy to work, considerably easier than oak. It cuts cleanly, blunts tooling only moderately, glues well and takes finish readily.

Its softness is the working consideration. Arrises bruise, edges dent, and clamps mark the surface if you do not pad them.

The open pores need filling for a smooth surface, as in oak.

Volumetric shrinkage of 12.0 percent is moderate, with tangential at 6.0 percent against radial at 3.5 percent. That differential is narrower than oak's, so chestnut behaves reasonably well in a wide flatsawn board.

It dries readily, though drying is where existing ring shake tends to open up.

Where Sweet Chestnut is the right answer#

Exterior cladding, fencing, gates, garden structures, shingles and outdoor furniture, where its durability and light weight both count. Indoors it suits panelling, light furniture and any piece where an oak look is wanted at a fraction of the weight.

It is the wrong answer for a hard wearing work surface, and wrong wherever ring shake risk cannot be inspected for before committing.

Not CITES listed and assessed as Least Concern. Abundant across southern and western Europe with long established coppice management in France, Italy and the Iberian peninsula. Supply is straightforward and documentation simple.

Coppice, and why chestnut comes in the sizes it does#

Sweet chestnut has been coppiced across Europe for centuries. The tree is cut close to the ground and allowed to regrow multiple stems, which are harvested on a cycle of roughly fifteen to twenty years for poles, fencing and stakes.

That management history shapes what reaches the market. A great deal of chestnut is small diameter coppice material, excellent for its traditional uses and useless for slabs. Timber sized chestnut comes from maiden trees grown on a longer rotation, and it is much less common.

The practical effect is that wide chestnut slabs are scarcer than the abundance of the species suggests, and they command a premium relative to how cheap chestnut fencing is. If a quote for chestnut slabs looks similar to a quote for chestnut posts, something is wrong with the description.

Chestnut against oak in the yard#

Side by side, the two are easy to confuse at a glance and easy to separate on a second look.

Chestnut has no visible rays. Oak has prominent rays that show as fleck on the quarter and as fine lines on the face. That is the reliable test, and it works on a rough sawn surface.

Chestnut is also noticeably lighter in the hand at 590 kg per cubic metre against 675, and softer under a thumbnail at 3,010 N against 4,980. If a board looks like oak and feels light, check the rays.

Yes, and more readily. Chestnut is very high in tannins, so contact with iron produces blue black staining quickly, particularly in damp conditions. Use stainless or brass fixings on any chestnut, and especially on exterior work.

Is it strong enough for a tabletop?

At 3,010 N it is the softest hardwood in this catalogue apart from black poplar, softer than Scots Pine. A chestnut tabletop will dent. It suits a piece where that patina is acceptable, and where the light weight and oak-like appearance are the attraction.

Crapadh toirtmhéadrach	12.0–13.5 %

Marthanacht nádúrtha (EN 350)	Class 2 — Durable

Foinsí

The Wood Database(rochtain 2026-05-09)
USDA FPL Wood Handbook FPL-GTR-190 (2010)(rochtain 2026-05-09)
Meier, E. — WOOD! Identifying and Using Hundreds of Woods Worldwide (2015)(rochtain 2026-05-09)

Sracfhéachaint

CruasMeasartha bog

Cruas Janka: 3,010 N

40 % níos boige ná dair

MeáchanMeánach

590 kg/m³

CobhsaíochtMeánach

Crapadh toirtmhéadrach 12.8 %

OibriúMeasartha

Meán binse 3.9 / 5

Úsáid lasmuighLasmuigh

Aicme EN 350 2

An praghas ar adhmad Sweet Chestnut ar fud na hEorpa faoi láthair, in aghaidh an mhéadair chiúbaigh roimh CBL. Tapáil aon phraghas le haghaidh sonraí.

Gnáthlomáin de réir tíre

Cén fáth a gcosnaíonn leac adhmaid níos mó ná seo?

Is praghsanna ar adhmad amh iad seo. Is í leac adhmaid an gearradh is fearr as lomán, stálaithe ar feadh bliana nó níos mó, ansin seiceáilte agus tomhaiste píosa ar phíosa. Ní dhéantar leac adhmaid ach as cuid bheag de gach lomán.

Foinse: Innéacs Adhmaid KORENA · Sonraí is déanaí 25 MFómh 2026

Féach ar gach praghas réigiúnach

Rátáil 4 as 5 do lúbadh gaile. Glacann sé cuair theanna.

Tapáil lipéad chun na sonraí a fháil.